Google Your SEO optimized title page contents

24…Band Saw Rip Fence made in the Shop

“Necessity is the Mother of Invention”
Plato….Ancient Greek Philosopher…(428 BC-348 BC)

Shopmade Band Saw rip fence

Front view Band Saw rip fence

The band saw rip fence is an invaluable saw accessory that is easy to build and provides for the safe operation when ripping low profile material. This at certain times cannot be provided by the manufacturer’s band saw fence. Obviously, when working at the tool the woodworker wants to limit the exposure of the band saw blade for reasons of safety. The workshop made band saw fence provides for safety by allowing the band saw guide bearing assembly to be lowered down to just above the horizontal rip fence. This happens because the L-shaped rip fence has side clearance for the bearing assembly to be raised and lowered. As a result, there is less band saw blade exposure to the hands of the woodworker. Join me as we learn how to make a band saw rip fence in the workshop.

The band saw rip fence proved to be quite useful for Hardwood Inlays made in the Woodworking Shop.

The fence is simple to build and scrap in the woodworking shop can be used for its construction. MDF was used for this fence because that’s what was readily available. However, plywood or similar material can be used also. Make sure that your choice of material is straight and flat. It will just take you 10 minutes to create the band saw fence and once you make it you will wonder why you did not make one sooner.

1.) Rip two strips of your chosen material on the table saw to your desired width and cut them to the length of your band saw.

2.) Create an L-shape fence by adding some yellow glue and then use pin nailer to fasten it.

3.) Add a ripping of hardwood (like oak or maple) to the edge of the band saw rip fence nearest the saw blade. This will provide a usable surface for years to come.

Note: The shop made band saw rip fence can be clamped to the manufacturer’s fence or it can be clamped to the band saw table when allowing for drift of the band saw blade.

More Related Videos:
How to Adjust for Band Saw Blade Drift

Ripping Thin Strips of Wood Inlay on the Band Saw

Cutting Thin Strips on the Band Saw

The Apprentice and The Journeyman University

Related Posts with Thumbnails
'http://c.compete.com/bootstrap/'; s.src = t + __compete_code + '/bootstrap.js'; s.type = 'text/javascript'; s.async = 'async'; if (d) { d.appendChild(s); } }());