Google Your SEO optimized title page contents

December 17, 2017

Woodturning How to Video – Wood Turn a Segmented Knob on a Wood Lathe

Woodturning How To Video – Wood Turn a Segmented Knob

 

Woodturning how to video - segmented woodturning - turned knob with tenonThis woodturning how to video shows how to wood turn a segmented knob on a wood lathe using basic turning tools. In this woodturning project a parting tool, roughing gouge, and spindle gouge with a fingernail grind were used to wood turn the glue up. The woods used for the glue up were hard maple and African mahogany.

Woodturning how to video - segmented woodturning blockThe YouTube woodturning how to video shows a woodturner tightening the segmented glue up into the lathe chuck and then turning a tenon. The tenon is then reversed and tightened within the lathe chuck so that the woodturner can woodturn the main body. Notice how the designs in wood appear as the woodturning takes shape.

 

.

Woodturning how to video - tenonA star pattern of maple emerges in the woodturning how to video as the woodturning project progresses. Watch how the  two laminated woods contrast one another as the woodturner rounds out the knob. Since the star pattern is solid throughout the wooden block, the white tips of the maple star appear as white lines between the arched African mahogany on the outside perimeter of the segmented woodturning.

 

.

Woodturning how to video - Segmented woodturningVarious grits of sandpaper are used to sand and smooth the wooden project of the woodturning how to video. The woodturner starts with 120 grit and progresses to 320 grit wet & dry sandpaper. Afterwards, the woodturning project is nice and smooth to the touch.

 

 

.

Woodturning how to video - Segmented woodturningFinally, the woodturning how to video shows how a wood finish of Tried and True varnish oil finish is applied. The lathe chuck still has a firm grip on the tenon, the wood lathe is turned on, and the finish is a applied using a paper towel. Only a small amount of the oil finish is necessary for a few reasons. The oil varnish simply goes a long way and the segmented woodturning is small. Also, the woodturner wants to avoid any splatter of oil as it is applied to the woodturning project. For this reason it is still a very good idea to work safe and always wear a faceshield during the application of the wood finish.

 

Watch more YouTube woodturning how to videos online.

…Your comments are welcomed…

The Apprentice and The Journeyman University


Related Posts with Thumbnails
'http://c.compete.com/bootstrap/'; s.src = t + __compete_code + '/bootstrap.js'; s.type = 'text/javascript'; s.async = 'async'; if (d) { d.appendChild(s); } }());