Google Your SEO optimized title page contents

February 23, 2017

Steve’s Table Saw Miter Sled

Table Saw Miter Sled – Viewer Built

 

Steve's Table Saw Miter Sled 2A table saw miter sled is one of the most useful table saw accessories that can be made by the woodworker in the workshop. In this woodworking article we will take a look at the table saw miter sled that Steve from Tropical Cairns, Australia built in his well organized woodworking shop.

(Steve learned how to make a sled for by watching and studying our free woodworking video, How to Build a Table Saw Miter Sled. He also accessed our free woodworking plans for the table saw miter sled.)

Notice that Steve is using a very flat plywood as the base for his table saw miter sled. Both the front and rear fences of the miter sled are of straight grained material. This is especially important for the tall fence closest to the woodworker as this section of the table saw sled serves as a cross cut sled. So, it is imperative that this fence is straight across when material is placed along it to be cross cut.

(Based upon the photo it looks like Steve is able to cross cut a board that is 4- 6 inches wide. So, essentially this table saw miter sled design also has the additional capacity of serving as a cross cut sled.)

Steve's Table Saw Miter Sled 1The interior fence system for Steve’s table saw miter sled is comprised of 3/4″ straight grained material that form a balanced 90 degree angle at the saw blade kerf. Theoretically, we want a 45 degree angle to both the left and right sides of the fence. More importantly, we want to ensure miter fence has a perfect right angle so that the sum total of our miter joint equals 90 degrees.

It is also worth noting that Steve has used a sealer for his table saw miter sled. By doing so, Steve who lives in the humid tropics has helped ensure that his miter sled for his 10 inch table saw will remain flat and true.

Note: When using a table saw miter sled for cutting miter joints or making a cross cut, do not be tempted to switch table saw blades.  It is recommended to use the the same type table saw blade as the original blade that was used to cut the sleds zero clearance saw kerf. The zero clearance saw kerf ensures against any wood tear out.

When cutting miter joints what methods do you prefer?

Do you prefer to a miter joint with a miter saw or table saw?

Many woodworkers cut miters with a table saw miter gauge. What is your preference?

 

More Miter Sled Videos:

Mastering the Miter Joint

Let’s Make Spline Miter Joints

Let’s Make Picture Frames with the Tablesaw Miter Sled

Miter Sled Article:

How to Make Perfect Miter Joints

 

Let us know how it your table saw sleds out for you. If you have sled photos that you’d like to share, feel free to contact me.

 

The Apprentice and The Journeyman University


Related Posts with Thumbnails
'http://c.compete.com/bootstrap/'; s.src = t + __compete_code + '/bootstrap.js'; s.type = 'text/javascript'; s.async = 'async'; if (d) { d.appendChild(s); } }());