Google Your SEO optimized title page contents

September 2, 2014

How to Make Picture Frames with the Table Saw Miter Sled

Picture Frames Made with a Miter Sled

 

“Learning never exhausts the mind.”
Leonardo da Vinci…(1452-1519) Architect, musician, anatomist, inventor, engineer, sculptor, and painter.

Picture Frames made in the Wood Shop

Making picture frames in the woodworking shop is fun especially when we have a system in which to work. In this case we are making the picture frames from picture moulding that was made on the router table and also on the table saw using dado blades. The dado on the moulding will house the decorative wood inlay that we have previously created in the workshop. (It is nearing the Christmas Holidays at the time of this writing and we have quite a few gifts to make.)

Cutting miter joints for picture frames

Cutting miter joints for picture frames

 

Picture Frames made in Production

 The picture frames that we are making have mitered corners so we are using the dedicated miter sled for the table saw. The sled is set up to cut perfect miter joints and this will allow us to go into production mode as we are building 12 picture frames at this time. Each of the picture frames will display pictures that are 5″ x 7″. The picture moulding is of a Peruvian wood called Camala.

 

The System of making Picture Frames

1.) Using the crosscut sled…Crosscut the moulding lengths slightly oversized.

2.) Divide the lengths into two separate piles (if the sides and top/bottom of the frame are unequal.)

3.) Using the dedicated miter sled… Cut a right miter on all moulding members.

4.) Determine the actual length needed for the sides, use a stop block to control the cut length, and cut the opposite miter.

5.) Determine the actual length need for the top/bottom, use a stop block to control the cut length, and cut the opposite miter.

6.) At the workbench… Assemble the frames by fitting, gluing, and using spring clamps to secure the miter joints in place.

 

Having a dedicated miter sled enables us to create wood projects that have miters with dead-on accuracy. Using the above system with the miter sled allows for production work that is quick and efficient. Appreciate the process and enjoy the results!

 

The Apprentice and The Journeyman University

Request a Free Rockler Catalog

Request a Free Woodcraft Catalog

Picture Framing

Table Saws

Table Saw Accessories

Shop Essentials

Finishes

Related Posts with Thumbnails

Speak Your Mind

*