Pleasure in the job puts perfection in the work.
…..Aristotle, Greek Philosopher (384 BC – 322 BC)
The “Wolf’s Tooth” decorative wood inlay banding pattern is a wonderful custom inlay used to embellish furniture, picture frames, wooden boxes, and a host of other woodworking projects. The wooden segments (teeth) were cut on the table saw equipped with a Forrest Woodworker II 40 tooth saw blade. Also, the dedicated miter sled was used in order to maintain precision and to create uniform triangular segments which make up the “teeth” of this hardwood inlay banding. White glue is used instead of yellow glue to allow a greater working time when assembling the segments into position within the banding “sandwich.” Veneer inlays called “bandings” will be sliced on the band saw at about 3/32″. The bandings will eventually be fit and let into a plough or dado of the wood project to be decorated.
The African mahogany picture frame reveals how a custom wood inlay banding like the “wolf’s tooth’ pattern can enhance a woodworking project. This hardwood inlay banding consist of maple, cherry, and walnut. Notice how the colors of the various hardwoods contrast one another within the repetitive pattern of the “teeth” and also how the borders play off of the mahogany picture frame. The wood inlay banding naturally draws attention to the picture frame and further draws awareness to celebrate the photograph.
A banding with the same “wolf’s tooth” pattern is shown below the picture frame. This particular veneer inlay includes maple, cherry, and walnut within the “teeth” pattern however, the outer border consist of walnut and holly. The pure white holly will create an even greater contrast than a maple border when inlaid into a wood with a dark tone.
(By the way…The photograph is of my Great, Grandfather along with his two prized working mules. The photo was taken on his farm outside of Salem, Missouri where he and his family were a few of the early settlers in this area during the 1850′s.)
Watch the following wood inlay videos: